 |
| |
| This line is designed for cutting of CR / HR carbon steel, Galvanized Coils into sheets of prescribed size and heap them up on Piler. |
| |
| Mechanism： | ※ Optional accessories | - Coil car
- Uncoiler
- Leveler
- Pit with guider
- Side Guide
- NC control conveyor
- Shear
- Conveyor
- Piler (Piler car)
| - Tape (Paper) stand
- Edge trimmer
- Electrostic generator
| |
| |
| Modle | Coil Width | Wall thickness | Machine Speed | Coil Weight | | JWCT-0825 | 800mm (Max.) | 0.4 mm - 2.0 mm | 45pc / min under 500mm | 10 MT | | JWCT-4020 | 1220mm (Max.) | 0.4 mm - 2.0 mm | 45pc / min under 500mm | 15 MT | | JWCT-4030 | 1220mm (Max.) | 0.4 mm - 3.0 mm | 40pc / min under 500mm | 15 MT | | JWCT-4060 | 1220mm (Max.) | 1.0 mm - 6.0 mm | 30pc / min under 500mm | 20 MT | | JWCT-5030 | 1525mm (Max.) | 0.4 mm - 3.0 mm | 40pc / min under 500mm | 20 MT | | JWCT-5040 | 1550mm (Max.) | 0.5 mm - 4.0 mm | 40pc / min under 500mm | 20 MT | | JWCT-5060 | 1550mm (Max.) | 2.0mm - 8.2mm | 30pc / min under 500mm | 20 MT | | JWCT-7130 | 2100mm (Max.) | 3.0 mm - 13.0 mm | 5 M ~ 40M / min | 20 MT |
|
